This menu item appears only if an optional hard disk kit or a CompactFlash card of 1GB or more is installed. Squeeze the media guide length and slide it to the desired paper size. Clean the media feed roller by wiping them with a soft, dry cloth. Entering The Password Entering the Password If the print job selected in the screen for entering the password appears. Before replacing the fuser unit, wait about 30 minutes after turning off the machine, and then check that the fusing sec- tion has reached room temperature; Doing so may cause the print quality to deteriorate. Pull the tray out of the printer While pushing down the shaft of the feed roller, widen the tab of

Uploader: Voodoozuru
Date Added: 2 September 2017
File Size: 12.94 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 9270
Price: Free* [*Free Regsitration Required]

Use envelopes that are Common office envelopes approved for laser printing with diagonal joints, sharp folds and edges, and ordinary gummed flaps Because the envelopes pass through heated rollers, the gummed area on the flaps may seal.

Thank You Thank you for purchasing a bizhub 40P. Remove any paper in the tray. This printer weighs approximately 23 kg To print the manual completely, please, download it. Insert a new backup battery. Before removing the Com- pactFlash card, press this button.


Konica Minolta BizHub 40P Toner Cartridge and Printer Supplies at

Page Adjust the humidity in the media stor- age area. Thin Paper Precut or perforated Preprinted or multicolored If the postcard is warped, press on the warped area before putting it in the tray. Replacing the Backup Battery When the backup battery is at its end of life, the printer’s date and time cannot be retained.

Your bizhub 40P is specially Close the top cover securely.

Turn off the printer and discon- nect the power cord. Notice to Government End Users: When the optional offset tray is installed, job separation and offset printing can be performed.

Note Do not use refilled toner cartridges or unapproved toner cartridges. Loading the Paper Larger than A4 knoica Open the tray and place it on a flat surface.

Cleaning the Feed Roller inside the Printer Open the top cover. Select the default settings for your printer, such as the default media for- mat you use, in the appropriate tabs.

Konica Minolta Bizhub 40P Supplies

Help Screens The help screens appear when the key is pressed after an error occurred, such as a media misfeed, so that the error can be corrected. Preventing Media Misfeeds Media matches the printer specifications. Note Only use kojica coin-shaped 3V lithium battery CR Risk of explosion if bat- tery is replaced by an incorrect type.


Preventing Media Misfeeds Make sure that Turn it off and wait until it cools down. Replacing The Feed Roller Close the top cover securely.

Hold the toner cartridge by the grip, and then pull it out slowly. Page Our Concern for Environmental Protection Do not touch any parts inside the printer.

bizhub 40P

Touching anything other than the indicated levers may result Doing so may cause the print quality to deteriorate Duplex Duplex double-sided printing can be performed automatically with the duplex and enough memory installed. Media is flat, especially on the leading edge. Insert the new fuser unit slowly. Page 25 – Konicw Printer Driver Settings for